欢迎来到澳大利亚箭牌路缘石摊铺机械中国地区代理

·联系我们|About us

山西繁源路缘工程有限公司

电话:0351 4125810

邮编:030012

邮箱:arrowmachinery@163.com

地址:山西省 太原市

迎泽区南内环街141号

·典型案列|Works

箭牌(ARROW)1000路缘机

箭牌1000型路缘石摊铺机

 ARROW 1000 SLIPORMER

 

操作手的优越位置

使传送带准绳和机器

吐出的路沿一览无遗

EXCELLENT OPERATOR

VISIBILITY OF THE

CONVEYOR,STRINGLINEAND THE FINISHED KERB

稳定的三足造型,承重传送带可在,各种场合轻松喂料.

STABLE3 TRACK CONFIGURATION HEAVY DUTY CONVEYOR FOR EASIER FEEDINGIN ALL SITUATIONS

手工收尾即切割接口十分简便

HAND FINISHING AND JOINT CUTTING ARE SIMPLE AND EASY.

弹簧液压制板减小了混凝土外溢,从而提高了产量。

SPRING LOADED HYDRAULIC SKIDS REDUCE BOILOUT AND IMPROVE YIELD.

POUR IN EXCESS OF 1000 METERS OFHIGH QUALITY KERB AND GUTTER PER DAY.

机器吐出的超级效果

SUPERIOR FINISH STRAIGHT OUT OF THE MACHINE

 

 

 


 

箭牌1000型足一种体型更大的路沿机,它使路卅的铺设更容易、更经济, 而且它模具中的栓使其能铈铺设障碍物及圆圈。

主要规格

发动机:KUBOTA 4缸水制冷柴油75HP连续运作2400RPM。

 液压: REXROTH泵。驱动与其他功能有各自的泵。CHARLYNN 引擎驱动,配FAIRFIELD TORQUE HRB 35:1减值。SUNDSTRAND 饲服阀。REXROTH 过虑器和配件。

 震捣: MINNICH液压2标准(选顶3)。 REXROTH泵3排压力补偿控制器。

 传感:SUNDSTRAND各种比例的均夷线和坡,带遥控坡度设置。

 控制器:MICRO-LOGIC达美国标准的单杆速度和方向手动控制。驱动轨道:配简易调节器的KOMATSU钢争。KOMATSU滚轴。经热处理的链齿轮。

汽缸:提升61 x 7. 5cms(24英寸x 3英寸)转向30x 7.5cms(12英寸x 3英寸)

速度:达1 5. 5米/分(50英尺/分)

半径范围:外置可达 91cms(3英尺)内置可达180cms(6英尺)

铺设路沿能力:外置最宽122cms(48英寸),内置最宽250cms(8.4英尺),外置最高100cms(31英寸)

模具:变化快速可供选择浮动的平台障碍物可达100cms(39英尺)

机内有可供选择的用具包来铺设人行道及高尔夫车道最宽达250cms(8.4英尺)可选择在暗销上方铺设,在路基或边沟以下铺设。

传输带:45cms宽,各种速度,传送到喂料斗。

 油箱:80升(21美国加仑)

 液压:150升(39美国加仑)

可供选择:自动后方向盘,缓冲器,箭牌1000型路缘机在定货时可根据要求选择左、右手操作。

 ADROW 1000 MODULAR IS A LARGER SLIPFORM KERBER WITH FEATURESTO MAKE UOUR KERBING EASIER AND MORE PROFITABLE.AND CYCLE WAYPAVING.

 ENGING KUBOTA water cooled diesel 75hp at 2400 rpm continuousHYDRAULICS REXROTH pumps.Separate punps for drive and otherfunctions.CHARLYNN motors for the track drives coupled to FAIRFIELD TORQUE HUBS 35:1 reduction SUNDSTRAND servo valves,REXROTH filters and accessories.VIBRATION MINNICH hydraulic 2 sfandard(option 3)REXROTH 6bank pressure compensated controller.

 SENSING SUNDSTRAND fully proportional for grade line and slope with renote slope set.CONTROLS MICRO-LOGIC manual control switches to U.S.Mil.Spec.Single lever speed and direction control.

DRIVE KONATSU steel tracks with easy adjuster.TRACKS KOMATSU rollers.Heat treated sporckets.(optional urethane track street sporckets)CYLINDERS LIFT.61X7.5CMS(24"X3")STEER.30X7.5CMS(12""0X3)SPEEDS To 15.5 mtrs/min(50ft/min)RADIUS Offset down to 91cms(3 ft.)Inbard down to 180cms(6 ft.)CAPABILITIES Offset max.width 122cms(48 in.)Inboard dowm to 250cms(8ft.4)Max.height offset 100cms(39 in.)MOULDS Quick changeOptional floating skidsBarreer to 100cms(39 in.)Sidewalks,tolf cart tracks with optional inboard kit to max.width 250cns (8ft.4in)Option to form over steel dowdels and to form below or adjacent to slab available.CONVEYOR 45cm,wide variable speed with hopper.hyd.shift as standard.FUEL TANK 80litrea(21 US gal.)HYDRAULIC 150litres(39 US gal.)OPTIONS Automatic rear steerUrethane track pads.

ARROW 1000 CAN IF ADVISED AT TIME OF ORDERING BE MADE FOR LEFT OR TEGHT HAND OPERATION